AS/RS Systems · Argentina
Drive-in Racking — High Density LIFO
High-density LIFO drive-in system: up to 6 pallets deep, space utilization up to 50%
STOKA integra, instala y da soporte a estos sistemas en Argentina y Chile.
Technical description
The Drive-in Racking system is a compact high-density storage solution. It allows forklifts to enter and exit the racking directly from one side, eliminating the need for multiple aisles. The total system depth normally supports up to 6 pallets (≤ 6 pallets) and achieves warehouse space utilization of up to 50%. It balances high space utilization with operational safety.
How it works
Forklift entry
The forklift enters the racking channel with the forks in a raised position. The forks rest on the guide rails at the correct height. The operator advances to the designated storage position, deposits the pallet and reverses.
LIFO flow
Drive-in operates in LIFO mode: the last pallet loaded is the first to leave. Pallets are loaded from front to back and retrieved in reverse order. This system is ideal for homogeneous goods with no mandatory FIFO rotation.
Maximum space utilization
By eliminating the aisles between each row of racking, drive-in concentrates storage in compact blocks. With up to 6 pallets deep per position, space utilization can reach 50% of the total warehouse area.
Spec sheet
| Rotation system | LIFO |
| Channel depth | Hasta 6 paletas |
| Space utilization | Hasta 50% |
| Access | Un solo lado (carga y descarga) |
| Anti-corrosion treatment | Silano |
| Operating temperature | -30 °C a +40 °C |
| Compatibility | Montacargas reach truck, estibador |
| Initial investment | Baja — sin equipos automatizados |
STOKA Engineering
Why implement it with STOKA
The drive-in racking STOKA implements is the lowest-initial-cost option for high-density storage. It is ideal for operations that have homogeneous, high-rotation products and want to maximize space without investing in full automation.
Technology with over 1,000 active installations in more than 30 countries. STOKA provides the local engineering: sizing, importation, installation, ERP integration and technical support in Argentina, without depending on overseas factory lead times. Learn more about the technology →
Frequently asked questions
Frequently asked questions
When is drive-in better than pallet shuttle?
Drive-in is cheaper in initial investment because it requires no robots. The shuttle offers higher density (up to 30 pallets deep vs. 6 of drive-in), greater safety (the forklift does not enter the channel) and higher throughput. For operations with a limited budget and moderate volume, drive-in is the right option.
Can it be used in cold storage?
Yes. The drive-in racking is available in a cold-storage version (-30 °C). The silane treatment and high-strength steel maintain their structural properties across the entire temperature range.
How long does installation take?
The mechanical installation of drive-in racking takes between 2 and 4 weeks depending on the project volume. It is one of the fastest installations in the catalog. STOKA coordinates the importation and assembly in Argentina.
Can it be converted to a shuttle system in the future?
In some cases it is possible to adapt the drive-in channels to receive shuttle robots, taking advantage of the existing structure. STOKA evaluates the technical and economic feasibility of the conversion for each specific project.
You may also be interested in
Related products
Ready for the next step?
Technical consultation
at no cost
A STOKA engineer analyzes your warehouse or depot and responds within 24 hours with initial technical guidance and an ROI estimate.
Ready to get started?
Free Consultation
Tell us what problem your warehouse has and within 24h we’ll tell you whether automation is worth it and how much you’d save.