Conveyors · Lifters · Palletizers · DELIE
10 transport equipment models to connect every point of your automated warehouse. From chain conveyors to automatic palletizers with WCS integration.
DELIE transport equipment
10
Available models
Complete transport range
3.000 kg
Max load per pallet
Chain and rollers
5 m/s
Maximum speed
Tote lifter
-25°C
Minimum temp.
Cold chain version
Full catalog
Why internal transport matters
Pallet transport
Chain conveyor
3,000 kg · frequency drive · cold -25°C
Roller conveyor
3,000 kg · accumulation zones · native WCS
90° transfer machine
Direction change without interrupting flow
Pallet lift
Between levels · up to 2,000 kg · ±2 mm
Palletizer / Depalletizer
Automatic formation · WMS/WCS integration
Tote and container transport
High-speed tote lift
150 kg · 5 m/s · 3 m/s² · 24/7 operation
Tote belt conveyor
Straight and inclined · multiple sizes · 24/7
Tote roller conveyor
Zone accumulation · MiniLoad and tote robots
Tote transfer
High-speed direction change
Landing and lifting machine
Up to 3,000 kg · frequency drive
Why automate internal transport
In an automated warehouse, the conveyor is as critical as the stacker crane: a bottleneck in the conveyor can reduce the total system throughput even if the robots run at full capacity. That is why the internal transport network is designed with flow simulation before installation — the WCS virtually tests the system behavior under demand peaks to ensure there are no bottlenecks.
Decree 513/2025 — Tax benefit
DELIE industrial transport equipment may qualify for Decree 513/2025, which reduces the import tariff according to the NCM classification of industrial conveyors, lifts and automatic palletizers. STOKA manages the complete import from China to your plant in Argentina.
Seguir explorando
FAQ
For 3,000 kg pallet loads, DELIE's chain or roller conveyor is the right choice. Both are sized for that load with a frequency inverter for smooth start. The choice between chain and rollers depends on pallet fragility and whether you need zone accumulation in the warehouse.
In many cases, yes. DELIE's WCS can control conveyors from other brands with standard control interfaces (PLC with Profibus, Profinet or similar). STOKA performs a compatibility audit during the technical diagnosis to determine which existing conveyors can be reused to reduce total investment.
DELIE conveyors have quarterly preventive maintenance: chain or roller lubrication, tensioner verification and sensor check. Wear components are standardized and available in Argentina. The WCS monitors each warehouse section and issues alerts before a failure occurs.
Yes. Cold chain conveyors operate down to -25°C with special lubricants, anti-freeze materials and hermetic design. They integrate with DELIE's cold line stacker cranes and shuttle robots to create a fully automated cold storage system.
Ready to get started?
Get a technical response from our team within 24 hours.